Global technology leader in the manufacture of wire and fibre rope solutions

Oil and Gas Industry - Seismic & Cable Laying

Steelite 12

Benefits:

  • Self floating
  • High strength:diameter ratio
  • Low elongation
  • Tailor made fabrications
  • Easily visually inspected
  • Round profile
  • Abrasion resistant coating

Material: Dyneema®, high modulus polyethylene SK75. Other material grades available on request

Construction: 12x1 braid

Colour: Dark grey (Other colours available)

Markers: None

Relative Density: 0.97

Melting Point: 150˚C

Torque Properties: Torque Neutral

Water uptake: Low

UV resistance: Very Good

Abrasion Resistance: Excellent

High quality performance fibre ropes.

Our world leading manufacturing capabilities are accompanied by a high level of quality assurance and in-house expertise in research and development and design engineering.

Bridon the benchmark for reliability.

*Rope Diameter

Rope Circumference

Nominal Mass

**Minimum breaking force (F min)

In Air

mm

ins

mm

ins

kg/m

lb/ft

kN

Tonnes

Tons (2000lb)

28

1 1/8

88

3 1/2

0.38

0.25

666

67.9

74.8

32

1 5/16

101

4

0.50

0.34

870

88.7

97.7

36

1 1/2

113

4 1/2

0.63

0.42

1059

108

119

40

1 5/8

126

5

1.75

0.50

1256

128

141

44

1 3/4

138

5 1/2

1.87

0.59

1432

146

161

48

2

151

6

1.04

0.70

1658

169

186

52

2 1/8

163

6 1/2

1.16

0.78

1854

189

208

56

2 1/4

176

7

1.42

0.95

2178

222

245

60

2 1/2

188

7 1/2

1.58

1.06

2374

242

267

64

2 5/8

201

8

1.74

1.17

2678

273

301

68

2 3/4

214

8 1/2

1.99

1.34

2953

301

332

72

3

226

9

2.24

1.51

3355

342

377

76

3 1/16

239

9 1/2

2.49

1.67

3728

380

419

80

3 1/8

251

10

2.74

1.84

4071

415

457

88

3 1/8

276

10 7/8

3.95

2.66

4905

500

550

96

3 3/4

302

11 7/8

4.55

3.06

5592

570

627

*Additional sizes avalible. Contact fibresales@bridon.com for more details. (16mm - 140mm)
** Breaking load figures are specified without terminations according to ISO2307:2010. A 10% reduction factor for spliced terminations should be allowed.

This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. View the full disclaimer here.